|
What could have don't this?
I have the stock wheels in but god knows what the last owner did, its the same on both sides all the way down to the metal. http://www.geocities.com/juanevegato...907071337a.jpg I think it was this... http://www.custom-wheels-n-rims.com/...neral-lee1.jpg hehe but i hope not. |
Re: What could have dont this?
This happened on my stock SRT6 and it was and still is almost completely bone stock. Only brakes were upgraded.
I suspect it is extreme wheel travel during corning that causes this. Cheers! |
Re: What could have don't this?
it is a friendly rub spot when backing with the wheels turned in full lock... (even in stock form).
|
Re: What could have don't this?
I'm not really sure what "don't" this...but I have a good idea what did that...more than likely wider aftermarket tires/wheels! :D
|
Re: What could have don't this?
Tires are the same and the offset in the front is stock, so the tire contact area is in the same spot... nice try apkano... besides, I'm pretty sure juan vega still has the stock rims and tires.
Andrew, What is a 'friendly' backing up rub area? With the wheels at full lock... why would that only happen while backing up? While stopping from moving in reverse? I personally think it's because my suspension has been to all extremes... can you say 'Track Time'? :D |
Re: What could have don't this?
Maybe...but like Juan said...what did the PREVIOUS owners do?
|
Re: What could have don't this?
I have stock tires and have a spot where they have rubbed.
|
Re: What could have don't this?
I just went and checked mine...no spot from tire rubbing. Strange? Then again I can pop the fuses for the ESP programming and still blow past 5,000 RPM too!
It seems we have happened upon another one of those "strange things about the Crossfire"! |
Re: What could have don't this?
I can understand it on Andrew's lowered car and MMZ Timelords track car. Juan maybe onto something with the previous owner... :confused:
|
Re: What could have don't this?
since i got track fever i been driving my car a little harder than normal but the previous owner could have done it... so what i'm gonna do to verify is, i'm gonna put some tape and i'm gonna drive for a bit... i'm gonna try to make it rub lets see how that works.
|
Re: What could have don't this?
juan vega,
Sounds like a plan. I'd be curious how long it takes to get rid of the tape. I may do the same thing and see if it is daily driving or track time that takes it off. Good idea! Cheers! |
Re: What could have don't this?
Originally Posted by andrew
it is a friendly rub spot when backing with the wheels turned in full lock... (even in stock form).
|
Re: What could have don't this?
I have a bone stock '04 limited and it has the same rub spots. But i have a lot of steep angle drives that i use frequently.
|
Re: What could have don't this?
Originally Posted by apkano
I just went and checked mine...no spot from tire rubbing.
|
Re: What could have don't this?
My SRT-6 is 100% stock and it does rub slightly when the wheels are locked one way or the other. I can hear it and feel in the floor board of the car when it does it. The first time it did it, I thought I had a flat tire and got out to check and nothing looked wrong. Then I remembered we have Tire Monitors. So the next time it did it, I looked a little further. The left wheel is worse than the right one, but that's do to it needing an alignment I would guess. I have noticeable rub spots, but it isn't down to metal.
|
Re: What could have don't this?
1 Attachment(s)
here is a picture of the 'friendly' rub on my lowered crossfire. it doesn't do any harm to the tire what so ever.
Attachment 51090 i have since taken the suspension off (2 weeks ago)... i used 3M undercoating and sprayed the entire metal wheel well area. |
| All times are GMT -4. The time now is 06:00 PM. |
© 2026 MH Sub I, LLC dba Internet Brands