CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Wheels, Brakes, Tires and Suspension (https://www.crossfireforum.org/forum/wheels-brakes-tires-suspension/)
-   -   Crack in the wheel (https://www.crossfireforum.org/forum/wheels-brakes-tires-suspension/27796-crack-wheel.html)

msgump 09-08-2008 01:24 PM

Crack in the wheel
 
I have a crack on my passenger rear wheel....it is small but looking for advice....can it be welded? Should I just replace it?

billangiep 09-08-2008 03:14 PM

Re: Crack in the wheel
 
The crack can be repaired but for piece of mind I would suggest a new one or at least a good used one.

Okiered 09-24-2008 07:16 PM

Re: Crack in the wheel
 
I had the passenger rear wheel crack. The crack was thru the lip, and about an inch into the wheel. I think the material of the wheel isn't suitable for welded for long term strength, so I replaced it with a used wheel.

msgump 09-25-2008 09:32 AM

Re: Crack in the wheel
 
thanks for your responses....going to a wheel place tomorrow and see what they say about it....they have a wheel for $225....I just might have to buy it...

msgump 09-25-2008 09:41 AM

Down shifting v using the brake
 
Have gotten pro and con answers to that question but wanted to see what all the pro's have to say about it.....I know brakes are cheaper than a transmission but if they put that option on my automative roadster, would it really hurt the transmission?

qttire1 09-26-2008 01:42 PM

Re: Crack in the wheel
 
most small cracks can be fixed, we have sent out many wheels to be welded and have all held without leaking. most wheel repair people should charge between 65-85 to repair a small crack.

msgump 09-27-2008 10:24 AM

Re: Crack in the wheel
 
Ended up buying a wheel for $185 and brought my old one home.....it has two small cracks that can be repaired for $85....so should I try to sell it as is, for how much, repair it and sell it, for how much, or repair it and hang on to it?
Didn't repair the old one because it would take two days and I could not get home.


All times are GMT -4. The time now is 01:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands