got ground clearance?
got ground clearance?
So I was working on the xf tonight when i kicked a can under the car. When I looked under it to get it I finally noticed just how low my car is, lol.
The pictures kinda suck due to the whole camera phone thing
This is a static drop on springs. Exactly 3.25" from the ground to the bottom of the front swaybar.
IMAGE_112.jpg
IMAGE_114.jpg
The pictures kinda suck due to the whole camera phone thing
This is a static drop on springs. Exactly 3.25" from the ground to the bottom of the front swaybar.
IMAGE_112.jpg
IMAGE_114.jpg
Re: got ground clearance?
Its about as low as i'll go for now. Fronts tuck about 1/4 from the lip of the wheel, on 215/35/18s in the front.
rears just as low, it only rubs at full lock so im ging to take of a bfh and massage the wheel wells a bit.
It doesnt clear speed bumps, or curbs, or guttered driveways but I like it.
When I get my new wheel setup I'll probably have to raise it a bit, or i'll just do a crazy fender pull front and rear and be done with it
rears just as low, it only rubs at full lock so im ging to take of a bfh and massage the wheel wells a bit.
It doesnt clear speed bumps, or curbs, or guttered driveways but I like it.
When I get my new wheel setup I'll probably have to raise it a bit, or i'll just do a crazy fender pull front and rear and be done with it
Join Date: Jan 2008
Location: Long Island, NY
Age: 36
Posts: 2,009
Likes: 0
Received 2 Likes
on
2 Posts
Re: got ground clearance?
Originally Posted by Infinite
I tend to avoid all objects on the road.
I actually plan my trip around the roads i know to avoid.
Its pretty bad when I can drive through downtown atlanta blind folded
I actually plan my trip around the roads i know to avoid.
Its pretty bad when I can drive through downtown atlanta blind folded
Thread
Thread Starter
Forum
Replies
Last Post
2005 Ragtop
Wheels, Brakes, Tires and Suspension
7
10-03-2015 03:01 PM
81's
Troubleshooting & Technical Questions & Modifications
13
09-13-2015 04:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)