Need help with a rear driver side suspension squeak AND a question about SRT6 brakes
Need help with a rear driver side suspension squeak AND a question about SRT6 brakes
Ok, first is the squeak issue. Over the past couple of months, a progressive squeak has formed around the rear driver side wheel. The squeak now occurs when driving with minimal to light bumps and is absent with harder bumps. When parked, the squeak can be reproduced by applying a moderate amount of force on the rear driver side of the car. I checked to ensure that the parking brake had nothing to do with the squeak (as noted in other threads). Overall, the squeak sounds terrible and i cant take it anymore!! ahhh!! So if anyone has some insight on this issue for our cars, please let me know (especially if you have any advice with a low budget attached, just spent a little under 2 grand on the car this winter due to an unlucky radiator resevoir leak, accident, and Skreem module malfunction).
Second, I need a little help in making sure I have the right front brakes for my car (2005 SRT6). Using partstrain.com I found both my rotors (which i know are correct due to the specs) and my brakes (what im a little worried about).... The brakes I bought are Akebono EUR682. Akebono EUR682 EURO Ultra-Premium Ceramic Brake Pad Set : Amazon.com : Automotive. I'm a superrr novice when it comes to brakes (and most things it seems), and noticed these brakes have a "two prong" bracket on the back of them as opposed to "one pronged" brackets. Soooo, did I make a goof in trusting partstrain.com or am I spazing over nothing?
Thanks tons for your help, these issues have added on additional stress to an already stressful month
Second, I need a little help in making sure I have the right front brakes for my car (2005 SRT6). Using partstrain.com I found both my rotors (which i know are correct due to the specs) and my brakes (what im a little worried about).... The brakes I bought are Akebono EUR682. Akebono EUR682 EURO Ultra-Premium Ceramic Brake Pad Set : Amazon.com : Automotive. I'm a superrr novice when it comes to brakes (and most things it seems), and noticed these brakes have a "two prong" bracket on the back of them as opposed to "one pronged" brackets. Soooo, did I make a goof in trusting partstrain.com or am I spazing over nothing?
Thanks tons for your help, these issues have added on additional stress to an already stressful month
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
Ok, first is the squeak issue. Over the past couple of months, a progressive squeak has formed around the rear driver side wheel. The squeak now occurs when driving with minimal to light bumps and is absent with harder bumps. When parked, the squeak can be reproduced by applying a moderate amount of force on the rear driver side of the car. I checked to ensure that the parking brake had nothing to do with the squeak (as noted in other threads). Overall, the squeak sounds terrible and i cant take it anymore!! ahhh!! So if anyone has some insight on this issue for our cars, please let me know (especially if you have any advice with a low budget attached, just spent a little under 2 grand on the car this winter due to an unlucky radiator resevoir leak, accident, and Skreem module malfunction).
Second, I need a little help in making sure I have the right front brakes for my car (2005 SRT6). Using partstrain.com I found both my rotors (which i know are correct due to the specs) and my brakes (what im a little worried about).... The brakes I bought are Akebono EUR682. Akebono EUR682 EURO Ultra-Premium Ceramic Brake Pad Set : Amazon.com : Automotive. I'm a superrr novice when it comes to brakes (and most things it seems), and noticed these brakes have a "two prong" bracket on the back of them as opposed to "one pronged" brackets. Soooo, did I make a goof in trusting partstrain.com or am I spazing over nothing?
Thanks tons for your help, these issues have added on additional stress to an already stressful month
Second, I need a little help in making sure I have the right front brakes for my car (2005 SRT6). Using partstrain.com I found both my rotors (which i know are correct due to the specs) and my brakes (what im a little worried about).... The brakes I bought are Akebono EUR682. Akebono EUR682 EURO Ultra-Premium Ceramic Brake Pad Set : Amazon.com : Automotive. I'm a superrr novice when it comes to brakes (and most things it seems), and noticed these brakes have a "two prong" bracket on the back of them as opposed to "one pronged" brackets. Soooo, did I make a goof in trusting partstrain.com or am I spazing over nothing?
Thanks tons for your help, these issues have added on additional stress to an already stressful month
Here is a pad for the SRT6, I have Akebonos and they are OK pads with little dust.
This is not an Akebono pad though.
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
Trust Dave to post a picture of a brake pad "Made in Canada"
and as to the squeak, spray some WD40 on the stabilizer bushing, if it goes away, that's the problem.
( THIS IS NOT A FIX, it's a diagnostic )
and as to the squeak, spray some WD40 on the stabilizer bushing, if it goes away, that's the problem.
( THIS IS NOT A FIX, it's a diagnostic )
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
Hey guys,
Thank you both for your help! I will try spraying the rear stabilizer bushing with some wd40 as described to see if it is indeed the problem! Thank you both for pinpointing it as a possible hotspot for the squeaks!! I will post back later with my findings.
Onehundred, thank you for the brake pad picture!!! that is EXACTLY what I needed!!! thank you thank you thank you!! Now I can finally get these things installed. Hopefully they arent tooooo bad of pads, although anything with less dust is a plus haha.
(also just realized that pretty sweet link in ya'lls signatures... *adds to favorites*....)
Kolme
Thank you both for your help! I will try spraying the rear stabilizer bushing with some wd40 as described to see if it is indeed the problem! Thank you both for pinpointing it as a possible hotspot for the squeaks!! I will post back later with my findings.
Onehundred, thank you for the brake pad picture!!! that is EXACTLY what I needed!!! thank you thank you thank you!! Now I can finally get these things installed. Hopefully they arent tooooo bad of pads, although anything with less dust is a plus haha.
(also just realized that pretty sweet link in ya'lls signatures... *adds to favorites*....)
Kolme
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
These pads are 100% asbestos free, not like most of the Chinese and off shore makes. These pads are made in Ontario at one plant and boxed for different brands. I am assured that the formulation of the pad shown in the photo is the same as Rotex Gold, for 1/2 the cost of Rotex.
This has been mentioned before a few times.
Google `Rotex Canada'
Last edited by onehundred80; 01-23-2013 at 11:07 AM.
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
Update::::
Well I finally got around to heading to Walmart and picking up some lubricant. Before appling it to the rear stabilizer bushing I decided to give my shocks a little bit of a spray out of curiosity. I pressed down on the car and got no squeak. I then drove it for about 10 miles or so, without any squeak from the rear... Soooo im guessing it was actually my shock absorber causing the issue....
However that leads me to my next question, why is the shock absorber doing this and what needs to be done? I tried to examine it for any cracks etc, but didnt see anything of that sort. I did notice that the shock did have an area which looked like it was chaffing or "bare" with a dried up greasy look... (Ill take some pictures tonight after studying for physio).
Thanks in advance, and ill reply back later with pictures.
Kolme
Well I finally got around to heading to Walmart and picking up some lubricant. Before appling it to the rear stabilizer bushing I decided to give my shocks a little bit of a spray out of curiosity. I pressed down on the car and got no squeak. I then drove it for about 10 miles or so, without any squeak from the rear... Soooo im guessing it was actually my shock absorber causing the issue....
However that leads me to my next question, why is the shock absorber doing this and what needs to be done? I tried to examine it for any cracks etc, but didnt see anything of that sort. I did notice that the shock did have an area which looked like it was chaffing or "bare" with a dried up greasy look... (Ill take some pictures tonight after studying for physio).
Thanks in advance, and ill reply back later with pictures.
Kolme
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
Update::::
Well I finally got around to heading to Walmart and picking up some lubricant. Before appling it to the rear stabilizer bushing I decided to give my shocks a little bit of a spray out of curiosity. I pressed down on the car and got no squeak. I then drove it for about 10 miles or so, without any squeak from the rear... Soooo im guessing it was actually my shock absorber causing the issue....
However that leads me to my next question, why is the shock absorber doing this and what needs to be done? I tried to examine it for any cracks etc, but didnt see anything of that sort. I did notice that the shock did have an area which looked like it was chaffing or "bare" with a dried up greasy look... (Ill take some pictures tonight after studying for physio).
Thanks in advance, and ill reply back later with pictures.
Kolme
Well I finally got around to heading to Walmart and picking up some lubricant. Before appling it to the rear stabilizer bushing I decided to give my shocks a little bit of a spray out of curiosity. I pressed down on the car and got no squeak. I then drove it for about 10 miles or so, without any squeak from the rear... Soooo im guessing it was actually my shock absorber causing the issue....
However that leads me to my next question, why is the shock absorber doing this and what needs to be done? I tried to examine it for any cracks etc, but didnt see anything of that sort. I did notice that the shock did have an area which looked like it was chaffing or "bare" with a dried up greasy look... (Ill take some pictures tonight after studying for physio).
Thanks in advance, and ill reply back later with pictures.
Kolme
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
Ahhh ok!!! So perhaps its just a little bit of a clearance issue (i hope so!) Thanks Onehundred for the reply.
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
I hope this helps!
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
I wanted to follow up that when I took my Crossfire in to my independent Mercedes shop, the only thing he could find was that my left rear shock was wet with fluid so he suggested replacing the rear pair. I ended up replacing all four corners with KYB and not only did the creak go away, my car was transformed! All the wallowing and crashing (which I didn't think was that bad) disappeared and the handling tightened up. Made me realize I could have done that a few years ago. Sweet.
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
I can't say what your problem was but mine was definitely sorted out with shocks. And, if you've got a lot of miles on the originals, you might be happy you replaced them anyway.
Join Date: Sep 2007
Location: MOFN, AL, 70 miles from George
Age: 66
Posts: 8,017
Likes: 0
Received 6 Likes
on
6 Posts
Re: Need help with a rear driver side suspension squeak AND a question about SRT6 bra
Huge thanks to the forum family and the pioneers that have and are making it easier for us late arrivals to enjoy our rides.