WTB - Items/Parts Wanted to Buy This is the section where you post a thread when looking for a Crossfire Specific item to purchase or even if you are looking to buy a Crossfire

Cupholder replacement storage bin

  #1 (permalink)  
Old 06-14-2018, 04:38 PM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 70
Posts: 2,552
Default Cupholder replacement storage bin

Anybody have one of these Crossfire cup holder replacement storage bins at a reasonable price??


Part #1BQ12XDVAA




Please e-mail me directly at [email protected] THANKS . . .
 

Last edited by RED DOG; 06-16-2018 at 08:14 AM.
  #2 (permalink)  
Old 06-14-2018, 08:22 PM
Senior Member
Join Date: Sep 2015
Location: Knoxville
Age: 57
Posts: 1,465
Default Re: Cupholder replacement storage bin

One of our members , is 3D printing them (Kurtp13). Maybe he'll run you one off. First one was a bit short..
 

Last edited by Steve Jr; 06-14-2018 at 08:32 PM.
  #3 (permalink)  
Old 06-16-2018, 08:09 AM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 70
Posts: 2,552
Default Re: Cupholder replacement storage bin

Originally Posted by Steve Jr View Post
One of our members , is 3D printing them (Kurtp13). Maybe he'll run you one off. First one was a bit short..

I sent Kurt a PM . . . We'll see . . .

In the meantime I'm still looking for an OEM Chrysler Part . . . Thanks!
 

Last edited by RED DOG; 06-16-2018 at 08:15 AM.
  #4 (permalink)  
Old 02-27-2019, 09:13 AM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 70
Posts: 2,552
Default Re: Cupholder replacement storage bin

For those of you looking for the storage bin to replace the Crossfire cup holder . . . LOOK HERE:

https://www.ebay.com/itm/Chrysler-Cr...53.m1438.l2649
 
  #5 (permalink)  
Old 02-27-2019, 10:51 AM
Forum Regular
Join Date: Nov 2017
Location: Alexandria, Kentucky
Age: 80
Posts: 324
Default Re: Cupholder replacement storage bin

RED DOG - I have a bin that was left in the console box by the previous owner. It is part number A 193 694 00 33. It looks to be smaller than the one you show from ebay and it has two small and one large rectangular holes is the side walls. It probably is not the part you are looking for but if you look it up it may be something you can use. Let me know.

Jim
 
  #6 (permalink)  
Old 02-27-2019, 07:35 PM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 70
Posts: 2,552
Default Re: Cupholder replacement storage bin

Originally Posted by Jim Holian View Post
RED DOG - I have a bin that was left in the console box by the previous owner. It is part number A 193 694 00 33. It looks to be smaller than the one you show from ebay and it has two small and one large rectangular holes is the side walls. It probably is not the part you are looking for but if you look it up it may be something you can use. Let me know.

Jim
Not sure exactly what you have there but googling that part number comes up with nothing (at least no auto part). Are you sure you posted the number correctly??
 
  #7 (permalink)  
Old 02-28-2019, 10:43 AM
Forum Regular
Join Date: Nov 2017
Location: Alexandria, Kentucky
Age: 80
Posts: 324
Default Re: Cupholder replacement storage bin

Bob - Just checked again and here is what's on the "thing". Shows part number A 193 694 00 33. It also has the letters > HC PP < and two mini clocks in the casting. There's no manufacturer name on the part. It could be that the previous owner that I spoke of bought it thinking it might work as a cup holder replacement but found it too small. Just a guess.

Jim
 
  #8 (permalink)  
Old 02-28-2019, 11:18 AM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 79
Posts: 21,465
Default Re: Cupholder replacement storage bin

Originally Posted by Jim Holian View Post
Bob - Just checked again and here is what's on the "thing". Shows part number A 193 694 00 33. It also has the letters > HC PP < and two mini clocks in the casting. There's no manufacturer name on the part. It could be that the previous owner that I spoke of bought it thinking it might work as a cup holder replacement but found it too small. Just a guess.

Jim
The clocks are to indicate the date and sometimes the time the part was molded. The HC/PP is the material, a common material is PC/ABS which is a combination of Poly Carbonate and Acrylonitrile Butadiene Styrene, you can see why it is normally called ABS.
PP is Polypropylene, HC I do not know (typo?)
 
  #9 (permalink)  
Old 02-28-2019, 12:16 PM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 74
Posts: 11,465
Default Re: Cupholder replacement storage bin

Originally Posted by onehundred80 View Post
The clocks are to indicate the date and sometimes the time the part was molded. The HC/PP is the material, a common material is PC/ABS which is a combination of Poly Carbonate and Acrylonitrile Butadiene Styrene, you can see why it is normally called ABS.
PP is Polypropylene, HC I do not know (typo?)
Are you sure you are not "AvE" that posts all those weird vijeos on uTube ?
 
  #10 (permalink)  
Old 02-28-2019, 06:10 PM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 79
Posts: 21,465
Default Re: Cupholder replacement storage bin

Originally Posted by Jim Holian View Post
RED DOG - I have a bin that was left in the console box by the previous owner. It is part number A 193 694 00 33. It looks to be smaller than the one you show from ebay and it has two small and one large rectangular holes is the side walls. It probably is not the part you are looking for but if you look it up it may be something you can use. Let me know.

Jim
The actual part number is A 193 680 03 52, never use the Chrysler number except for reference.
The hole in the top is 4.45" x 1.45" and 4.5" at the deepest end.
It is made from PC-ABS.
 

Last edited by onehundred80; Yesterday at 11:01 AM.
  #11 (permalink)  
Old 03-02-2019, 07:29 PM
dedwards0323's Avatar
Senior Member
Join Date: Nov 2008
Location: Upstate SC
Age: 68
Posts: 6,147
Default Re: Cupholder replacement storage bin

Originally Posted by onehundred80 View Post
The clocks are to indicate the date and sometimes the time the part was molded. The HC/PP is the material, a common material is PC/ABS which is a combination of Poly Carbonate and Acrylonitrile Butadiene Styrene, you can see why it is normally called ABS.
PP is Polypropylene, HC I do not know (typo?)
I think it is "High Crystalline" Polypropylene. Typically is listed w/o the "/" between (HCPP).
 
  #12 (permalink)  
Old 03-02-2019, 08:03 PM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 79
Posts: 21,465
Default Re: Cupholder replacement storage bin

Originally Posted by dedwards0323 View Post
I think it is "High Crystalline" Polypropylene. Typically is listed w/o the "/" between (HCPP).
It looks like I added the /, silly me. Sorry.A bit late but I just stumbled on this again.The bin is actually PC-ABS, where HCPP came into the equation I have no idea.
 

Last edited by onehundred80; Yesterday at 11:05 AM.
  #13 (permalink)  
Old 05-18-2019, 11:38 AM
Join Date: Aug 2018
Location: Goose Creek, SC
Age: 53
Posts: 3
Default Re: Cupholder replacement storage bin

Red Dog did you ever get a response from Kurtp13? I sent him a PM today, but was not sure if you had ever received a response. Recently the cup holder on my 2005 Chrysler Crossfire had the plastic pin that keeps it held down break so it stays up all of the time. I have looked on Ebay and salvage yards and the prices are ridiculous.
 
  #14 (permalink)  
Old 05-18-2019, 11:58 AM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 70
Posts: 2,552
Default Re: Cupholder replacement storage bin

Originally Posted by gatormustang View Post
Red Dog did you ever get a response from Kurtp13? I sent him a PM today, but was not sure if you had ever received a response. Recently the cup holder on my 2005 Chrysler Crossfire had the plastic pin that keeps it held down break so it stays up all of the time. I have looked on Ebay and salvage yards and the prices are ridiculous.
If you want the cup holder replacement storage bin . . . Look here: https://www.ebay.com/itm/Chrysler-Cr...53.m1438.l2649

If you want to replace your broken cup holder (though I'm not sure why anyone would want to) Look here: https://www.ebay.com/sch/i.html?_fro...ire+cup+holder
 
  #15 (permalink)  
Old 05-18-2019, 01:17 PM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 79
Posts: 21,465
Default Re: Cupholder replacement storage bin

Originally Posted by RED DOG View Post
If you want the cup holder replacement storage bin . . . Look here: https://www.ebay.com/itm/Chrysler-Cr...53.m1438.l2649

If you want to replace your broken cup holder (though I'm not sure why anyone would want to) Look here: https://www.ebay.com/sch/i.html?_fro...ire+cup+holder
Be advised that the finish varies on the 2004 model year and the later models. The 2004 models have a glossier finish and the later model years have a duller finish.
The difference is subtle but obvious when the different parts are side by side.
This applies to all the silver parts on the console and other silver parts in the cabin.
 
  #16 (permalink)  
Old Yesterday, 09:35 AM
Join Date: Dec 2014
Location: Calgary, AB
Age: 55
Posts: 269
Default Re: Cupholder replacement storage bin

Has anyone had any experience with the 3 D printed version as seen on E-Bay?

Red Dog please keep us posted whether you opt for OEM (if you can find it) or 3d printed
 
  #17 (permalink)  
Old Yesterday, 10:30 AM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 70
Posts: 2,552
Default Re: Cupholder replacement storage bin

It is impossible to find the original ones . . . sold out everywhere. I have three of these 3-D printed cup holders in hand. Really nice quality. No issues. Go for it!

https://www.ebay.com/itm/Chrysler-Cr...53.m1438.l2649
 
  #18 (permalink)  
Old Yesterday, 06:01 PM
Join Date: Aug 2018
Location: Goose Creek, SC
Age: 53
Posts: 3
Default Re: Cupholder replacement storage bin

@onehundred80 I have seen a Cup Holder on Ebay for $167, but it has a different part # than the one I got from the local Chrysler dealership. The part # they provided for my 2005 was ZC59XZAA, which they have for $259. The one on Ebay that I found and also was on the link that Red Dog provided has a part # of 1CG68XZAAA, but it says that it is for 2006-2008. I called my local dealership back and they said that as far as they can tell that won't work for a 2005. Do you or anyone else know if this Cup Holder 1CG68XZAAA would work for my 2005. For a $90 savings I would much prefer to buy that one.
 
  #19 (permalink)  
Old Yesterday, 07:36 PM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 79
Posts: 21,465
Default Re: Cupholder replacement storage bin

Originally Posted by gatormustang View Post
@onehundred80 I have seen a Cup Holder on Ebay for $167, but it has a different part # than the one I got from the local Chrysler dealership. The part # they provided for my 2005 was ZC59XZAA, which they have for $259. The one on Ebay that I found and also was on the link that Red Dog provided has a part # of 1CG68XZAAA, but it says that it is for 2006-2008. I called my local dealership back and they said that as far as they can tell that won't work for a 2005. Do you or anyone else know if this Cup Holder 1CG68XZAAA would work for my 2005. For a $90 savings I would much prefer to buy that one.
The first number is the bin and the second is for the cupholder itself.
 
  #20 (permalink)  
Old Yesterday, 08:34 PM
Join Date: Aug 2018
Location: Goose Creek, SC
Age: 53
Posts: 3
Default Re: Cupholder replacement storage bin

I may have been confusing in my last post. Maybe this will clarify it:

Part # for the Storage Bin replacement is 1BQ12XDVAA

Part # for the Cup Holder is 0ZC59XZAA (I received this number from my local Chrysler dealership and can get this from them at a cost of $259)

Part # for a Cup Holder on Ebay is 1CG68XZAAA (the description on Ebay says its for 2006-2008 and costs $167)

I would prefer to replace my broken cup holder with another cup holder as opposed to the replacement storage bin. My question is will the cup holder on Ebay with part number 1CG68XZAAA work for a 2005 or is it only for a 2006-2008?
 

Thread Tools
Search this Thread
Quick Reply: Cupholder replacement storage bin


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.