This morning, I removed the radio, found the screws that hold the center stack cover, removed the center stack cover, removed the air vents at the top of the stack and found and removed the two screws that go through the top of the console riser into the instrument panel top cover.

I've now completed all of the steps needed to remove the instrument panel top cover (with the exception of step three at the top of page 23-150 of the PDF version of the manual) shown in the service manual.

This step describes the removal of one screw each from the left and right air vents, but I cannot find the screws.

I'd sure appreciate it if someone with a copy of the service manual would take a look and see if they can find these screws in the left and right vents on their Crossfire coupe...

- Bill