CrossfireForum - The Chrysler Crossfire and SRT6 Resource - View Single Post - Is the brake install any different on the SRT

Jul 30, 2007 | 10:07 AM

#8 (permalink)

bflinn

Forum Regular

Joined: Feb 2007

Posts: 412

Likes: 0

From: Vandalia, OH

Re: Is the brake install any different on the SRT

I was looking for the lowest possible brake dust as well, and alot of forum members like the Rotex. I previously had put Akebono ceramics on my 2004 coupe and saw extremely low dust and wanted the performance of ceramic so I went with the EBC Red stuff. I would have went back to Akebono, but they don't make a pad (apparently or that I could find) for the SRT. So far (about 150 miles) there seems to be virtually no dust - so it seems to have accomplished my goal and I think they were a little cheaper than Rotex's ($92 for front and $68 for rear).

Check the following link for more info on the EBC.
http://www.ebcbrakes.com/automotive.html

Reply

0