Thread: Dyno Question
View Single Post
Old Sep 6, 2007 | 01:28 PM
  #12 (permalink)  
RPM's Avatar
RPM
Moderator
Joined: Jan 2007
Posts: 3,062
Likes: 1
From: Mid-Michigan
Default Re: Dyno Question

Originally Posted by Fino
Thanks for the info. I wanted to get actual numbers on my car before I started doing a couple mods. I was then going to dyno it in-between the ECU mod and exhaust mod. It looks like I will not be able to get preliminary numbers though.

On a side note can anyone expand on the SI situation? I looked for a thread and couldn't find one. Like some of the others I didn't know there were any issues. If there are indeed serious issues, I'll have to go some where else for the calibration...

X'ed, I have a couple of pics of my GLHS in my gallery along with the CSX-VNT I use to have.

Thanks.
Do a search for 'Someone has a particulary strong' or similar. It will bring up a huge SI thread (I think).

Not sure what is going on w/SI. I have sent them ~ 3-4 emails in the past few months w/no response at all.
 
Reply