View Single Post
Old Oct 7, 2007 | 04:28 PM
  #1 (permalink)  
msheredy's Avatar
msheredy
Forum Regular
Joined: Dec 2006
Posts: 953
Likes: 1
From: San Diego, CA
Arrow Gauge setup on it's way

I just bought some digital gauges from Nordskog Performance for my SRT. I'm going to mount them in a Mustang gauge pod that will mount on the dash right above the vents in the center. I choose the green lit gauges with the silver bezels to somewhat match the existing color scheme. I order an air intake temp gauge to work along side a boost gauge that way I can see if there are any imminent problems with the intercooler water pump. Attached are some pics from their respective websites. I will do a write up once I receive them and do the install.

I have found out from an individual named Vadim on the MB forum that the ECU shuts the supercharger off when the factory air intake temp reads 225ºF.
 
Attached Images
File Type: png
Picture 1.png (121.4 KB, 16 views)
File Type: png
Picture 2.png (108.6 KB, 16 views)
File Type: png
Picture 3.png (63.8 KB, 21 views)

Last edited by msheredy; Oct 7, 2007 at 04:30 PM.
Reply