Well, I just got off the phone with Rob from NeedsWings. He was on his way back from the Dyno and was pretty excited by what the results were.

I don't have the exact specifics, but just during the brief conversation we had it would seem he has a STRONG car in stock form to begin with, but none the less, here's what he told me. I'm sure he will be able to elaborate more once he has a chance to analyze all the info.

DynoJet Roller:

Best Run 100% Stock = Exactly 300 WHP

Best Run With his intake = 330 WHP

Consistent WHP with his intake = 322

By the way, this dyno was done while hooked up to a StarTech MB diagnostic Laptop that allowed the 5,000 RPM cutoff to be cleared for the runs. These runs, I assume were all the way up to 6,000 RPM. So, that seems about right, since most seem to be in the 280 ish range at 5,000, and peak power doesn't happen till 6,000 RPM. Mine came in today, and I'll be up at dawn installing it.