hello, yes we hit the rollers tonight playing with the intake, stock pulls were 295, 296, 300, with new intake swapped in we made 319, 320, 321, 322, 330, we also picked up 20 some ft /lbs of torque going from 28x to 307.
we also played with the octane settings in the ecu, tried base, 89, and 93 settings, 89 setting kept the hp around 280, base and 93 were consistent in the 300 neighborhood, so not gains there, sorry i was hoping to pick up power by turning the ecu cal to 93 octane but it did not make a difference over the "base" setting. all the pulls for the before/after intake pulls were done in the "base" setting.
i'll post the dyno graphs up hopefully later tonight, its been a long day so maybe tomorrow but i'll try for tonight if i can get the scanner dug out of the basement and hooked up, got a couple cell phone vids also, i'll have to get them onto the computer and se if the sound came out good enough to hear the supercharger whine with the new intake on the car. overall we are very pleased with the results and these will go on sale on our website as soon as we get our results back from our test fitters.
thanks,
rob
www.needswings.com