Thread: Dyno Results with A/F ratio...
View Single Post
Old Oct 29, 2007 | 04:57 PM
  #10 (permalink)  
Chi-Town SRT/6's Avatar
Chi-Town SRT/6
Forum Regular
Joined: Aug 2007
Posts: 499
Likes: 2
From: Saint Charles Illinois
Default Re: Dyno Results with A/F ratio...
Originally Posted by ShawnQ
Nice results...what did they charge your for your runs? There are three shops around me with dynos, and they are around $60 for 3 runs with A/F metering.

Also, isn't there a 'trick' to dyno'ing these cars? I thought I remember a certain way to do it...could've been on the base with the 6 spd though...

Here are some good reads for Dynojet vs Mustang dyno
(and you can relate with the Z06's)
http://www.z06vette.com/forums/archi...p/t-47063.html
http://forums.corvetteforum.com/show....php?t=1812437
http://www.gotstang.com/blogs.php?blogid=219

SQ
It was 90 because they had to drill into the exhaust for 2 runs. And there is a special way to dyno these cars...you have to take out fuse 17 and 18 on the drivers side under the hood and put the car in 4th gear for the pull. Rob at "needswings" gave me that info...
 
Reply
0