Thread: Why does the M112 engine's torque fall off at 4,750 rpm?
View Single Post
Old Jan 10, 2008 | 09:36 PM
  #7 (permalink)  
HDDP's Avatar
HDDP
Senior Member
Joined: May 2004
Posts: 4,094
Likes: 8
From: Charleston, SC
Default Re: Why does the M112 engine's torque fall off at 4750rpm?
Just my 2 cents... MALCB & DYEZAK hit one of the nails on the head... The flow is choked on the exhaust side...

PS: DYEZAK The NA injectors are not 19lb

NA ENGINE: 17 lbs/hr at 3.8 Bar, or 55 psi/ 14.5 ohms.
SC ENGINE: 51.6 lbs/hr @ 55.1 PSI / 14.5 Ohms based on 380 kPA = 3.8 bars = 55.1 PSI
 
Reply
0