Thread: Key programing
View Single Post
Old Jan 27, 2008 | 01:55 PM
  #1 (permalink)  
Nightrider's Avatar
Nightrider
Senior Member
Joined: Apr 2007
Posts: 926
Likes: 3
From: Norwich CT
Default Key programing
This is straight from the Crossfire manuals supplied to the dealership, or if you are a Chrysler tech, I got it from Tech Connect.

STANDARD PROCEDURE - TRANSMITTER PROGRAMMING

The Remote Keyless Entry Transmitter(s) can be programmed by the customer without special tools.
PROGRAMMING PROCEDURE

Transmitter programming by the customer is done by performing the following steps: Insert the key into the ignition switch.
  1. Press either the lock or unlock button momentarily twice.
  2. Turn the key in the ignition switch to the ON/RUN position within 30 seconds.
Hope this is useful and saves you $100.
 
Reply
2