View Single Post
Old Feb 14, 2008 | 05:29 AM
  #77 (permalink)  
Steve Hellums's Avatar
Steve Hellums
Senior Member
Joined: Oct 2006
Posts: 1,409
Likes: 2
From: INDIANA
Default Re: 185mm Pulley Install

Originally Posted by SLK32Germany
Maybe someone can check this with GPS...

In my opinion it is impossible to reach "real" 200MPH with a SRT-6. In KM/H this means 321,67!! I don't know the correct air-drag-coefficient (0,37?) x cross-sectional area (the right word for German "Stirnfläche"?) but I estimate, you need at least 500HP at the crank, if not more, to reach "real" 200 MPH. You can compare with other high-speed cars...Nevertheless the SRT-6 is a great car and very fast

Kind Regards
Bruno
air-drag-coefficient, Yeah, Some one had posted quite a while back that the Crossfire had the air-o -dynamic's of a brick . There have been post about the speedometer being off, but the post were about the speedometer being about 2 to 3 mph slower than they were actually going.

BYW, sorry for hijacking your thread Brian
 

Last edited by Steve Hellums; Feb 14, 2008 at 06:32 AM.
Reply