View Single Post
Old Feb 14, 2008 | 02:47 PM
  #85 (permalink)  
bikecop's Avatar
bikecop
Joined: Aug 2007
Posts: 293
Likes: 0
Default Re: 185mm Pulley Install

Originally Posted by Steve Hellums
I know I've read on the forum that the SRT 6 would redline on the tach before it would reach 200 MPH. That may be a possabilty with the OEM tire size, but I'm running a 285/35/19 on the back witch is an inch taller. If you use the calaulator I'm posting, for every 60 mph you would add 2 mph to your speedometer reading, so when my speedometer reads 180 mph I'm actually doing 186 mph (tach was at 5,600 to 5,700). With my RENNtech kit my redline was raised to 6,200 RPM, so I think 200 mph is obtainable in my car. To bad I don't have a brother or best friend driving a state cop car with a radar, I would rather be clocked with a radar so I would know the speed without question. HEY bikecop .
http://www.rims-n-tires.com/rt_specs.jsp
Hey Steve, come on up I will give you that clock you asked for. I have a really nice radar set up, hey it even has a remote control.
 
Reply