Re: Slasher Stripes
OK
I guess I have been getting a little carried away with these stripes but the material is inexpensive so I thought I would try the Aluminum look to better match the wheels.
As it turns out is also matches the SSB closely to.
So I installed the 2.5" Aluminum stripes over the original 3" black stripes and got the look I like the best out of all my trials
This is the link to the manufacturer website.
Click where to buy to find a retailer near you.
This is the product the member Mike-in-Orange used on his aero blue Crossfire.
They have 35 designs and colors and it comes in 5" wide 36" long sheets and can easily be cut.
Last edited by Valk; May 22, 2008 at 08:21 PM.