Thread: Slasher Stripes
View Single Post
Old Mar 20, 2008 | 04:41 PM
  #43 (permalink)  
InfernoRedXfire's Avatar
InfernoRedXfire
Senior Member
Joined: Jul 2007
Posts: 7,951
Likes: 9
From: Dallas, the Republic of Texas
Default Re: Slasher Stripes
Originally Posted by VALKRYDERGUY
OK
I guess I have been getting a little carried away with these stripes but the material is inexpensive so I thought I would try the Aluminum look to better match the wheels.
As it turns out is also matches the SSB closely to.
So I installed the 2.5" Aluminum stripes over the original 3" black stripes and got the look I like the best out of all my trials
This is the link to the manufacturer website.
Click where to buy to find a retailer near you.
This is the product the member Mike-in-Orange used on his aero blue Crossfire.
They have 35 designs and colors and it comes in 5" wide 36" long sheets and can easily be cut.
Here it is:
This one gets my vote. But I think you need to increase the angle a bit. It's too vertical. IMHO Look at the angle you did the other ones.
 
Reply
0