I washed my car about a week ago (two bucket method etc.) and waxed with Klasse AIO. The application went well and the car looked fine although I wanted a deeper shine. Yesterday I wiped the car down with Meguiar's ultimate detailer (to remove fine dust as it has been mostly sitting in garage) and applied Klasse SG with a applicator moistened with mequiar's detailer (per instructions). I noticed a bit of haze from the start but was able to buff most of it out. I do believe now that I did not give the SG enough time to dry believe I buffed it out. Now I notice some some spots (almost looks like water spots) in the roof. Its probably on other surfaces as well but easier to see there. I tried taking Detailer to it but with no effect. The Klasse instructions say to go over it again with SG if there is a problem (with no moistening of applicator). I am afraid that I am going to cause scratches by rewaxing. I was thinking about giving it another quick shot of detailer to remove dust and try the Klasse SG again. Please help advise me here. By the way I used the hand method for application.