Re: Did some 1/4 mille runs using my Gtech.
Originally Posted by SpaceManSpiff
I got a Gtech meter about 2 weeks ago. It didn't take long to learn that you need a straight and real flat road to get accurate readings. Its hard to find high quality roads without bumps that don't have any traffic. After much searching I found a decent road without any traffic. I got one good run in before I had InMotion Tune the car. Just did a run today after the InMotion tune. Once I get the launch down and maybe some new tires I can improve the embarrasing 60ft times. I plan on going to a track for my first time this summer for some "official" times. Do these numbers seem to add up to you guys. 113.61mph looks high for 12.747.
Pre-InMotion
ET: 12.927@104.94mph
60ft: 2.241
330ft: 5.725
1/8m: 8.518@90.30mph
1000ft: 10.881
60mph: 4.592
Post-InMotion
ET: 12.747@113.61mph
60ft: 2.196
330ft: 5.639
1/8m: 8.413@90.80mph
1000ft: 10.768
60mph: 4.472
Edit: Did another run before it got dark. I have it set at the default of 12in rollout.
ET: 12.447@117.01mph
60ft: 2.14
330ft: 5.5
1/8m:
8.222@92.82mph
1000ft: 10.522
60mph: 4.242
I have mine set at the 12" rollout and here's what mine looked like. Your bottom two sets of #'s look a lot like mine.
The first two pic's were after removing the resonator & installing the 55"Y" and the 2nd two were before installing the 55"Y".
Last edited by Steve Hellums; Apr 4, 2008 at 02:20 AM.