View Single Post
Old May 3, 2008 | 02:51 PM
  #4 (permalink)  
Moparrbust's Avatar
Moparrbust
Senior Member
Joined: Dec 2007
Posts: 1,685
Likes: 3
From: Las Vegas
Default Re: Yaw Sensor question

Originally Posted by badseed1
Ignition was off with the key out and none of them lit up with my test light.

Ignition on, motor at idle: One wire set off my test light... (1) Red and Green striped wire.

I take it this is the positive power wire?

correct, that is the power sourse and it means the sensor is only active with ignition on.
 
Reply