Hey 240, I am not going to be saying much until it is done, I come on here excited as a school girl to post pictures, and then I second guess myself. I look at the pictures, even though I can see the hard product in my hands, I look through the pictures and hate how sloppy it looks.You guys should all be happy you have a perfectionist on your hands lol. I am on what looks to be the final and possibly production mold stage. This set up will not wrap around but it will come damn close. The reason I tossed in the fabric Idea was it is so tough to make a mold that wraps around one side and the top and be able to pull the original out from, It is almost impossible, I have to do a ton of trimming. When trimming If I take too much it is start over take to little fitment is a *****. I figured If we just did an over lay with fabric, the bondo would not have to be 100% perfect or the sanding, because it would be covered in fabric, also it would wrap the edges and the look would remain stock.

We are at about build cost $250 with a good amount of resin and material left, material is cheap resin is a little bit more expensive, but we should be able to keep this under $300-$375 as far as R&D and material to make them go..... I did not think it was going to be even close to this number when i first started it, But again I want this to look perfect, ever new mold requires brushes, respirator,material 6 feet squared, gloves, 6-8 oz of resin, sometimes 10, little things that start to add up when you do it 30 times. Just doing a rough estimate, if each person pitched in $75 that will leave us with roughly $40 dollars left for per pod per-person. I had a quote done on labor and fabric one yard of our headliner fabric is roughly $80 and it would be about $40 dollars to cover them, the fabric would wrap over and around the pillar, to look factory. Depending on how many we can do in a yard would tell us if that price is going to jump higher or lower. We ARE LOOKING AT OEM fabric as well, I do not want to go with something cheaper that just matches the color, for some of you really worried about price this could be an option.

What I was planning on doing, Is just busting one of these out I have a new mold almost done, it is just a matter of bondoing and creating the master mold from it. It is in the finishing stages, I want to come back here with that before We take any step towards fabric.

Just hear me out, The way I look at it still is this is not my money to really be spending, I am at the point where If I can come up with one for myself, and every last one of you hates it, I can justify returning everyone their money and be fine with knowing I spent $300 on an awesome product for me and I have a mold to make more maybe others will like it. That is the easy part, The part that is hard, Is me going and spending another $120 on labor and fabric totally $420 for you guys to hate it. I would have to eat that cost. ITs so tough coming back here with all my ideas that I know would look better and what I would do telling you guys this could cost you $90-$100 to have it, who knows maybe more, that is just an estimate on fabric and labor pricing. I don't know Maybe some of you get what i mean, its starting to sound like a ramble .lol

Anyway important question is everyone look at the picture from page 2, tell me if your pillar is that same color ?? Like i said I remember my limited being that color, even though the leather and consul was different color. I think we all have the same headliner color and pillar color. I have gone through a bunch of pictures on here and ebay, As far as I can see they are all the same regardless of roadster or coupe or SRT

Anyway Give me till next weekend to get this done I am not going to post and update or anything anymore I am going to come back with product and a price, and see who still wants in, Is that cool? I am learning as we go, I am still going to check the site, and your input is still very important.

Chas Got your payment the list is complete.....