Thread: 178/181/185 pulley comparison
View Single Post
Old May 8, 2008 | 07:08 PM
  #5 (permalink)  
RMADERMAN's Avatar
RMADERMAN
Senior Member
Joined: Jan 2007
Posts: 2,116
Likes: 0
From: Miami, Florida
Default Re: 178/181/185 pulley comparison
Originally Posted by Moparrbust
You might want to reread his very first sentence.
Your tough lol.

I think that he was simply giving his figures w/ the 185 pulley. Unless you can change a pulley in 19 MIn and run a 1/4 and have the other pulley to switch, then run another 1/4 mile...... then do another 19 min pulley change then run another 1/4 run. And on and on.

Or you could get on the mustang dyno and get the number comparisons. But, they might be lower then you expect. Then you might be bummed out if you spent 3 grand to find out that you really did not gain that much HP or speed.

Man I love this Forum.

Seriously, it is great to read all of the posts, both technical and personal. The different opinons, some bantering and learning from each others experiences and knowledge of cars and experimentations with the Crossfires. Especially, since I have minimal expertise in that department.
 
Reply
0