Thread: wheel spacers???
View Single Post
Old Jun 21, 2008 | 09:40 AM
  #29 (permalink)  
Jeep2Xfire's Avatar
Jeep2Xfire
Forum Regular
Joined: Nov 2007
Posts: 743
Likes: 1
From: Jacksonville, FL
Default Re: wheel spacers???
Originally Posted by Steve Hellums
I'm running 10mm's on front & 20mm's on back with my Stren ST-8 Hyper mesh II wheels. Before I mounted them I done some measuring, the OEM bolts thread into the hubs 16 to 17 mm's. Then I ordered the spacers & lug bolts so that I was staying at the OEM length. I done the same thing when I bought the wheels for my Drag Radials and I'm running a 10mm spacer with them on the back. The 1st pic is how the car looks normally, the 2nd two are with the Drag Radials w/ 10mm spacers.
New Wheels & Tire's On SRT 6-p1010826.jpg19" Racing Slicks-p1020626.jpg19" Racing Slicks-p1020622.jpg

I don't see a difference. I am looking for how far the wheels stick out of the wheel well. Is this wrong. I figured with thicker wheels and tires they'd stick out further. Although that is subjective with backspacing being different from wheel to wheel.
 
Reply
0