Hi All,

Had my crossfire for a couple of weeks and loving it. I've already done the 'bang for buck mod' on the stereo, well worth the £4 from maplins.

Anyway could anyone help out. My Xfire has a little red push button in the roof trim next to where the buttons are for gate/garage buttons. If I press it it illuminates for about 2 seconds then goes off. I've pulled back the trim and confirmed my thoughts that its something to do with the alarm system, its wired as below:


wiring loom < ----[box1]----[box2]-----[alarm sensor 1]


[box2|-------[alarm sensor 2]

[box1]----------[red button]


sorry if this is not a good diagram but I cant tab out the white space to make my diagram work, basically box 2 has both the interior motion sensors attached and box 1 has box 2 relayed off it and the red button.

there are no part numbers or serial numbers on the boxes (about 1.5"x 3.5" each) so google pretty much dead ended me there.

Any ideas appreciated I just don't want to start pressing it lots to find its function in case it immobilises the car!

Second one for you, I've never had a V6 before, I've never had anything over a 1.6 before so you can imagine my constant grin at the moment. When I'm idiling every so often I get a little 'jiggle' from the engine, I've read people on the forums suggesting new iridium sparks for a rough idle, it doesnt feel rough but I have nothing to compare it to. ideas?

Cheears all, and I hope to make a meet at some point soon. I'm in the guildford area so if anyone is near by drop me a line, I did see another areo blue (but softy) in Bisley (just down the road from me) only the 3rd I've seen I think.

Jamie