View Single Post
Old Oct 11, 2008 | 07:44 AM
  #450 (permalink)  
Eleventeen's Avatar
Eleventeen
Joined: May 2008
Posts: 118
Likes: 0
From: Voorhees, NJ
Default Re: Aluminum Intake Manifolds for srt6

Originally Posted by MD SRT6
I don't want to say to much too quick because I haven't ran or dyno'd them, but these mani's have changed the way my car runs. Before - the build time on boost took a few seconds, now it's instant! Cruising 25mph and stomp down and bam 18.5 and climbing, before it was stomp down and 14.5 then climb gradually to 18.5,19.5 or so. The difference is instant boost, I guess it's the overall added volume?! We will find out on Sunday as I have not even been 2 miles with them yet, I'll report back
Just out of curiosity, did you tap your boost gauge into the open "tank" on your stock pieces, or tap into the inlet tubes before the tank? The main restriction of the stock units is just before the tank so the readings will be understandably different if you were tapped into the tank portion.

Definitely let us know how well these things work. I am guessing they will be great!
 
Reply