Weeelll...

I installed my stock pulley back, with the stock 1 shim, and the clutch still spins at idle in park. You say its normal but I'm wondering how hard should you have to press to stop it? I put on a glove and pressed HARD but it didn't slow down at all.

I used 2 shims on the C3 pulley, then 1 shim, always the same thing, and now the stock 1 shim with the stock pulley...

This stinks. I'm thinking something may really be wrong here...

Also, just in case the sun was sending radioactive magnetic energy through my electrical, I unplugged the clutch but its still spinning full force.