Thread: My 181 install experience. Boost levels + concerns & thoughts
View Single Post
Old Nov 18, 2008 | 08:37 AM
  #53 (permalink)  
splinter's Avatar
splinter
Joined: Sep 2007
Posts: 217
Likes: 0
From: Los Angeles
Default Re: My 181 install experience. Boost levels + concerns & thoughts
...I'm pretty sure the stock injectors are 34.8ish lbs but run at 44ish due to the 4 bar fuel pressure.
Our Bosch 280 156 304 (MB# 113 078 01 23) injectors ostensibly flow ~45.8 lbs/hr or 482 cc/min at 3 bar/43.5 psi, and 51.6 lbs/hr or 542 cc/min at the system’s design pressure of 3.8 bar/55.1 psi.

source: http://users.erols.com/srweiss/tableifc.htm#BOSCH

 Trusted outfits-
 www.lindertech.com
 www.rceng.com

When TVT_DESIGN can hook us up with a fuel supply & tune to help alleviate going lean with the 181+C3P setup…
 
Reply
0