Thread: !!! LET Motorsports Pulley Failure !!!
View Single Post
Old Nov 25, 2008 | 10:49 AM
  #242 (permalink)  
tighed1's Avatar
tighed1
Senior Member
Joined: Aug 2008
Posts: 5,741
Likes: 98
From: Sierra Vista, Arizona
Default Re: !!! LET Motorsports Pulley Failure !!!
Originally Posted by tighed1
Don't go away from this thread 180.
I find your posts informative. Lots of good info to consider.

I like the two bearing idea.
Makes a lot of sense.
Sheeesh! I find your comments informative also Montana. I also enjoy reading everyone's comments.
No need to attack others that wish to provide their input just because they don't mirror yours. Hopefully between all of us we can come up with a viable solution to this problem.
I figured that the two bearing idea would of faced the to open sides of the bearings together with the outer sealed side protecting the two bearings. True, RPM would still be a concern but it seems that with two bearings sharing the load there would be less stress thus less heat and possibly longer bearing life.
Anyone else with ideas or comments feel free to post. That's what the forum is here for!
Enjoy!
 
Reply
0