Thread: Stacked pulley is not for me...
View Single Post
Old Jan 15, 2009 | 06:58 PM
  #6 (permalink)  
waldig's Avatar
waldig
Senior Member
Joined: Feb 2008
Posts: 4,508
Likes: 34
From: VA
Talking Re: Stacked pulley is not for me...
Belt slipping is a function to the load on the belt and the surface in contact with the pulley. I was asking so much of the belt as the boost at 25 PSIG is way over the load at say 18 PGIG. The effort goes up like the cube of the boost pressure, its enormous loading to expect.

I was on the original street tires, but the power was phenominal and Iam glad that I made it back with all the large pieces attached.

Enjoy, Woody
 
Reply
0