Re: Of Long Posts and Superchargers...
Originally Posted by TemjinX2
Hi, lot of good reading on this thread. How much did it cost you to machine down your sc pulley? Would it be possible to machine down a code3 pulley from 65mm to 62mm?
I would rather just machine down the pulley rather then get a crank pulley since i already have a code3.
I think Code3 with the 65mm is a good compromise of good power and little belt slippage. Maybe it would not be a good idea to make it even smaller...
Last edited by SLK32Germany; Sep 27, 2009 at 07:00 AM.