View Single Post
Old Apr 2, 2009 | 12:37 PM
  #8 (permalink)  
vladd's Avatar
vladd
Joined: Sep 2008
Posts: 71
Likes: 0
From: Richmond, VA
Default Re: Misfire on cylinder 3

well thank god for nice weather. Went out to check the plugs on the injectors to find that the screws holding the rail down were loose as **** and two injectors weren't even close to seated properly. I'm guessing I was too careful when I installed them (and it was below freezing when i did it as well).


anyway i fixed it and so far so good, so consider this fixed unless I come back and complain more!
 
Reply