Thread: 6,000k Halogens
View Single Post
Old Apr 10, 2009 | 10:26 AM
  #6 (permalink)  
faiz23's Avatar
faiz23
Forum Regular
Joined: Nov 2008
Posts: 610
Likes: 1
Default Re: 6000k Halogens

seriously save your money on that TYPE_ RRRRRRRR bullshit,

do not buy HALOGEN BULBS.

buy this set of HID in 55watt in a 5000k or 6000k seriously do not go over 6000k, i have 6000k on a 55watt kit and for me it is too much color. the higher the K the lower the brightness of the output and the spread and intensity. stock bimmers and mercs run around 4100l-4300k.

55watt kits are brighter but honestly only run like 45-48 watts, the tend to wash color a little so a 6000k can look like a 5000k. on regular kits do not go 6000k too much color and reduce your light.

i used the regular kit on my car for them which was a slight bit cheaper and i have no issue with light out warning or anything like other on the board. I tapped right into the h7 plug without any splicing at all.

pick up the 55 watt 5000k-6000k
pick up the 35 watt 4000k-5000k


http://www.ddmtuning.com/products/DD...it-101-85.html
 

Last edited by faiz23; Apr 10, 2009 at 01:53 PM.
Reply