Thread: Headlight Replacement - SRT6
View Single Post
Old May 21, 2009 | 03:33 PM
  #9 (permalink)  
waldig's Avatar
waldig
Senior Member
Joined: Feb 2008
Posts: 4,508
Likes: 34
From: VA
Talking Re: Headlight Replacement - SRT6
I have done it several times with and without the front end on. Front end off is easier.

There are two GOTCHA 10 mm bolts per headlight on the I Cant see them Bottom. Must get up close and personal from the BOTTOM to access them. Removing the splash shields on the inner fenders allows access. Again front end off is easier.

On my lift the front end comes off in about 10 minutes, pull wires and un do the 10mm bolts -------------its off, tough the first time.

Leaning toward the weekend.......................Woody
 
Reply
0