Thread: Air Bag Light On After Lighted Accessories Install???
View Single Post
Old Jun 22, 2009 | 09:37 AM
  #1 (permalink)  
MisterTaz's Avatar
MisterTaz
Joined: May 2008
Posts: 261
Likes: 1
Question Air Bag Light On After Lighted Accessories Install???
Hello All,

I am in need of your technical expertise. Over the weekend I installed lighted door sills and lighted signal mirrors in my Roadster (thank you Chis ). I followed the install threads here and other than a minor panic or two everything went extremely well (Big Thanks Max ) and they look and work beautifully.

After I completed the installs I of course took a little ride (just to be sure everything worked as good as it looked ). My issue is that to my dismay I now have a red air bag light on in the the instrument cluster.

When I disassembled everything to be able to run the wiring I removed both access panels at the ends of the dash. The one on the drivers side hides the fuse box and the one on the passenger side contains the passenger air bag shut off switch. I unplugged the air bag shut off switch from the right hand dash panel so it wouldn't hang when I did my install. Afterwords I plugged the switch back in a reinstalled the panel.

Switching the air bag switch "off" then "on" does not clear the light. Has anyone else had this happen? Do any of you have any ideas on how to clear this? And yes the battery was disconnected for several hours while I was installing the kits.

Thank you for your time and consideration; your help and knowledge are much appreciated.

Stay safe...


Respectfully,


Paul (MisterTaz)
 
Reply
0