View Single Post
Old Jul 3, 2009 | 03:41 AM
  #19 (permalink)  
Rasim's Avatar
Rasim
Joined: May 2008
Posts: 86
Likes: 0
Default Re: Code3 Mid pulley initial impressions

Originally Posted by SRTpowa
Put the stock belt/configuration back on. Making 19-20#'s(60-75 degree ambient) AF ratio is 11.8-12.5. Intake temps were running kinda hot tonight(75 ambient) Peaked 157 after a couple pulls to 100mph. Dropped to 115 at cruise speed and some time later fell to around a 100. I ran my 1/4 mile program which is usually pretty accurate on trap speed, but not ET. I did a very mild launch in D mode and trapped 113mph. To bad I sold the hoosiers because I can't launch on the street without blowing the tires off. If I can get it to stick at the track I'd expect that trap to be about 2mph higher.
So, as i understand you do not happy with COD3 wrap kit? and suggest to use original wrap kit?
 
Reply