Haha you only read the first sentence didn't you...
Somebody please send them a cam! It's a piece of metal, just like any other camshaft. It can be reproduced and modified! Just because Shrick was the only company that made them doesn't we have to spend thousands on the freaking things. We have SOHC's, Hydraulic roller setup. It's ~1998 Mercedes technology, not exactly cutting edge.The car can be modified. If a custom cam were to be made, it would be a good idea to have a group buy. That would push the manufacturer to produce the product, and at a lower cost than a one-off custom.
Originally Posted by black05
don't bother. colt is not for our cars.
To Michael,
Thank-you, for contacting us.
Sorry we have not seen this model as of yet.
However, I have been working with cams for over 25 years and designing something new has always been my one of my passions.
A few questions need to be answered first on the valve trane, example: solid or Hyd lifters, roller or flat tappet, sohc or dohc etc…
We would need to see your cam first to determine what the stock lift and duration is. At this point I can design something with you over telephone that will suit what you’re after as well as cost.
There is no charge if we can’t do anything for you. We will also pay for the return shipping back to you if this is the case.
If you are interested please give us a call at your convenience and I will go over the details.
Thank-you,
Geoff Bardal
FOR OUR U.S. CUSTOMERS REGARDING SHIPPING
When sending in your cams, via any courier service or the post office.
Please put as the value of the cams to be under $10.00.
This falls under NAFTA and no duty charges will be inflicted on you.
Please put on the waybill as well as on the package.
"Damaged Camshaft for Repair and Return"
PAYMENT
We only accept International Money Orders in US funds made out to Colt Cams Inc.
COLT CAMS INC.
#54 - 3347 262 nd Street
Langley , BC
V4W 3V9
TEL: (604) 856-3571
FAX: (604) 856-3572
www.coltcams.com
geoff1@coltcams.com