View Single Post
Old Aug 17, 2009 | 10:41 PM
  #22 (permalink)  
KrzyFast's Avatar
KrzyFast
Forum Regular
Joined: Nov 2007
Posts: 532
Likes: 3
From: Currituck, NC
Default Re: Nitto Invos - New Rubber!

I got them mounted today. I will have to get some pics tomorrow and post em up. I only put about 5 miles on it, but man they are quiet and they ride nice. I didn't notice any extra side wall flex, but I did air them up a bit. So far a great tire! They look BadA$$ too!

I went ahead and aired them up to 40psi as SRT SIX had mentioned. The one thing I did notice was the front tires were within about a 1/4" of the nut on the upper A-arm. I am wondering if that is too close?? I don't have spacers on the front and I went with one size wider (235/40/18) from factory. I wonder if I need 5mm or 10mm spacers on the front now? I did not notice any rubbing on my short drive, which is good.

-SRT SIX, when I mentioned the tires smelling bad they were still sitting in my garage taped up waiting to be mounted. No rubbing. They did not smell like normal new tires. It was a bit funky. But now that they have been sitting in the garage 5 days the odor is gone. I guess they just needed some time to air out!

That is it for now guys. Stand by for pics tomorrow.
Later,
KrzyFast
 
Reply