Re: Radio Removal Key
Anyone handy with a file can make their own with some .030" to .040" thick steel. Go to the following site and download the photo, print it out at 1:1 (full size) and use it as a template. You might spend a half hour or so making them, how hard can it be?
You only need to make two with the profile shown in the top right (or bottom left) hand corner, the width is .35" and 2" long is just fine.
The photo shows a set of keys with three different styles of key, you only need one style
http://akamaipix.crutchfield.com/pro...0869001-f.jpeg
If you jamb the key in and it will not come out don't blame me. I made some and they worked fine, I made them from plastic and they lasted about five minutes, but they did work.
Last edited by onehundred80; Sep 8, 2009 at 08:12 PM.