Thread: Squeaky engine noise?
View Single Post
Old Oct 4, 2009 | 01:26 PM
  #3 (permalink)  
PA/XFIRE's Avatar
PA/XFIRE
Forum Regular
Joined: Sep 2007
Posts: 436
Likes: 0
Default Re: Squeaky engine noise?
Originally Posted by mr-lama
My srt6 just started having a slight squeak in the engine. It sounds like it's towards the very front, around the belt area. It sounds like it's mostly at low rpm's, and goes away at anything above that.

I haven't noticed any power loss though. Everything seems to be working fine, no heat problems or anything. Just a squeak, but an annoying one.

It's getting cold here at night, maybe it just caught a cold?
Are you running stock ? If not what modifications are you running ?I had a similar noise when i was running stacked pulleys and the code 3 wrap kit. When i removed the midsize c3 pulley and and removed the c3 wrap kit and replaced it with the needswings pulley saver kit the squeak dissapeared.It
seemed when the s/c kicked in thats when i heard the noise then it would dissapear.It had to be one of the three c3 pulleys bearings starting to go.I
would use the woodyscope test on your pulleys. Good luck finding the source
of the problem. ILLCYA
 
Reply
0