Originally Posted by black05
First impressions are that this is the best stuff I've used on an engine ever. With in 15 mins the manifold went from a scorching 300 deg, to a cooling 68 degree. Unbelievabe.
i agree. this is unbelievable. please explain the conditions where the part went from 300 deg to 68 deg. certainly wasn't in the oven baking. wasn't on the engine either unless the ambient air temp was 68 deg and the engine was cooled to ambient air temp. your missing part of the story.
It came from the oven at 300 and cooled off to 68 which was ambient. Not much else to tell.
That is extremely impressive for these manifolds as the uncoated pieces were still warm to the touch after this time.
There is almost no smell associated with the baking. Only tools needed are a sand blaster, a detail spray gun, and an oven.