Dyno-Tuning Tomorrow!
Hey guys - I just wanted to let everyone know that tomorrow morning I will be strapping my cross to the dyno and getting the ECU tuned! I have been looking forward to doing this for a while and a local shop happened to be hosting a yearly dyno event this Saturday. I know several people on here have been reluctant to believe what these cars are capable of without the dyno sheets to prove it, so I am hoping to get a hold of some screen captures for some positive feedback. I have already been informed that the dyno run summaries will not be printed as they are going to be running quite a few cars, but I bet I can convince them to let me do a screen capture and that will work just as well for our purposes.
Now then, here is a quick breakdown of what all is going on under my hood, and I would like to also point out that none of this would have been possible without this community, and the wealth of knowledge that I have found within!
Grill Mod
Removed air inlets
3" TVT Pipes and silicone sleeves
MB V8 Airbox (OEM Filters)
MB V8 MAF Housing (stock sensor)
MB V8 Throttle Body
19 lb Injectors
I am working with TVT and Eurocharged on the tune and I am hoping to see low 230s hp to the wheels, but wouldn't be too surprised if it goes a bit higher than that. I will be sure to update this thread between runs if possible, but most definitely with the end results!
Last edited by Jerk Daniels; Nov 6, 2009 at 02:31 PM.