So Finally got the Dynolicious App and used it on my car. Took a little tinkering to get it to work right, you have to know the weight on your car down to the exact pound or the measurement is way off. But anyways, did three runs after i got it running right. The read outs where,
271.51hp@5890 and 238ft/lbs@5661
283.33hp@5930 and 241ft/lbs@5753
277.67hp@5900 and 239ft/lbs@5697
Which gave me a average of 277.50hp and 239ft/lb
I did it at sea level and the outside temp was 58 degrees. i would say perfect conditions
You can read what mods i have in my signature, I think that with headers and a pulley 300hp is possible.
(oh and this was done with the MB cover intake, not the WAY better flowing 3'' intake from TVT)