Thread: Pulley Diagram
View Single Post
Old Nov 30, 2009 | 04:21 PM
  #8 (permalink)  
kolevski's Avatar
kolevski
Forum Regular
Joined: Nov 2008
Posts: 1,031
Likes: 0
From: Australia
Default Re: Pulley Diagram

Originally Posted by 32krazy!
doubt that belt slippage is the cause. i beat on mine all the time with a c3 setup and never lost a belt. this may be due to belt tensioner getting weak or some foriegn fluid on the belt itself or most likley improper belt alignment
check all your pullies for good alignment and for wear.
He man I thought that aswell but the alignment is perfect and definatly no fluids, it may be cause the water/meth it I'm running about 55%meth 45% water this may be creating additional boost and the belt couldn't handle it!!
 
Reply