View Single Post
Old Feb 3, 2010 | 08:54 AM
  #8 (permalink)  
BLKFIN's Avatar
BLKFIN
ADDICTED TO BOOST
Joined: May 2005
Posts: 1,625
Likes: 1
From: McKinney, TX
Default Re: Playing around with Dynolicious

Originally Posted by lacerdaschoon
Hmmm did u have major traction issues? With my accelerometer i consistantly get 4.5s to 60mph with my two mods in quiet industrial areas which are obviously not ideal compared to the track. With your pb 1/4 u should easily be doing 4.5s? I used my accelerometer at the track and was off by 0.15 of the track ET time. I think low 4s with your mods for sure
Yes, I was having traction issues. I tried 4 or 5 times to launch differently, but the car would not hook up. On all passes, I would just roll into the throttle and let off a bit as soon as the tires start spinning, thats why I get the 2.5 60fts even with 285/30/20 rear tires.

On a prepped track, I can stall the car to 1600 rpm and pull 1.7-1.8 s all day, it is the cold concrete streets that are the issue.

I too feel the trap speeds are being inflated by the traction issues and the software. I useally run 114-116mph so 120 is a bit high.

Still a fun little toy~
 
Reply