Originally Posted by 32krazy!
thats not going to fit in the space were the sec. cats are located. its a full muffler not a cat. you could use it to replace your muffler but realize without headers most exhaust mods yield minimal results.
the best setup i have seen on a xfire was metal miltia's true dual setup with an ansa muffler. a bit loud but he pulled some great dyno numbers with minimal mods and a dyno tune
Of course it will fit, if you measure across from one cat to the other its more then enough room, trust me I've looked and looked again, it will definatly work. Here are some other interesting numbers I found.
The results in HP order:
1.Flowtech Warlock (open) 374.2 hp/ 333.1 tq
2.Bassani Real Street 373.7 hp/ 333.8 tq
3.Hooker Maxflow 373.5 hp/ 333 tq
4.Borla XS 373.3 hp/ 332.6 tq
5.Magnaflow 372.8 / 332.5 tq
6.MAC 372.3 hp / 331.5 tq
7.Flowtech Afterburner 372.3 hp/ 330.1 tq
8.Hooker Aerochamber 372.1 hp/ 330.4 tq
9.Bassani 372 hp/ 333.5 tq
10.Spintech 371.6 hp/ 332.2 tq
11.Edelbrock Performer RPM 370.9 hp / 331.3 tq
12.Borla XR1 370 hp/ 334 tq
13.Flowtech Terminator 369.5 hp / 331.3 tq
14.Dynomax Ultra Flo 369.4 / 333.2 tq
15.Flowmaster 369.4 hp / 331.8 tq
16.Flowtech Warlock 366.3 hp / 325.3 tq
17.No muffs 365.2 hp / 330.1 tq