i need the complete set. I noticed the holes wouldnt line up, but for the sake of broadening everyones horizons, im not adverse to drilling/welding, lol.

My plan was to install them srt-6 style, mount a custom air-to-water in the stock location, make a custom elbow for the throttle body to place it near stock location/orientation and run the intercooler piping similar to the stock instake tubes.

I was going to get rid of the stock fan, and install a pusher fan in front of the radiator, along with a hardwired ic pump and heat exchanger. The turbos would mount in front of the motor behind the radiator. I'll try to doodle up a drawing later