Originally Posted by oledoc2u
you can use a flat head screw driver...put a shop rag between the middle divider and the grille...pry a little pushing the grille to the outside, pull out...there you go....
Got one out this afternoon. Had some paint can openers from Lowes and I hooked one about in the middle down low, and the other one next tot he center of the front end. I then just pulled on the one in the middle and it popped out, and so held it out and pushed in on the end near the center. Bingo it was in my hand. Have to wait a couple days when rain stops so I can wash in soapy water and dry....thanks for the advice....Popeye
