View Single Post
Old Mar 14, 2010 | 11:52 AM
  #11 (permalink)  
amx1397's Avatar
amx1397
Senior Member
Joined: Apr 2008
Posts: 6,703
Likes: 435
From: Indialantic Fl./blairsville Ga
Default Re: Micky Mouse Differential

[quote=blue bullet]DOC: I THINK THE REAR IS STRONG ENOUGH, FOR A HIGH END SPORTS CAR.

THE RATIO THING. OK 3.27 IN SRT6 TCUvs ECU CONFLICTING INFORMATION OR IS THERE WHEEL SPEED SENSORS SENDING INFO VIA STABILIZER? IF THE TCU IS IN CHARGE ITS RECEIVING INFO FROM SOME WHERE, OUTPUT SPEED SENSOR IN TRANS ? OR WHEES.

the info is the speed into the tranny and the speed out of the tranny has to be within a % of total or you go into limp mode,, what i did was ,,i installed 205 55 16 tires and wheels 24.88 tall (stock is 26.03) on my car the car ran great it would spin AUTO,, 1 geat to 6200 2 gear to 6200 and i let off at 5600 in 3 gear,,, also at 80 mph i nail it and it starts spinning ,going sideways i had to let off, that is why i put the 327 ininto my car the numbers say it would work. but it did not. with the 327 i ran the stock wheels and tires only. jim
 

Last edited by amx1397; Mar 14, 2010 at 11:57 AM.
Reply