Re: Looking for Multifunction Tool
Originally Posted by medenney
Just contacted local Chrysler Dealer, gave me a quote for 109.00 dollars for this tool. Any suggestions where I can find one more reasonable? (local MB dealer not helpful)
If you can cut and file one from metal, here's the sizes, it's .135 thick, 1/8" is close enough.
Here are the two variations I have had, I gave the second one away.
If you are really lucky, you may find yours in the pocket on the bulkhead between the seats, others have and it had been there since the car was new.
Last edited by onehundred80; Mar 16, 2010 at 08:35 PM.